Ripon Trailer Centre - Main Ifor Williams Distributor in North Yorkshire
Home Contact us      
spacer
Livestock | Horsebox | Car Transporter | Commercial | GH Plant | Canopies | Tiltbed | Unbraked | Used Equipment |
spacer
Car Transporter
CT177 | CT115 & CT136 | Beavertail | Tiltbed | Spec (29KB)|
spacer
spacer
blank blank

A versatile transporter, wide enough for most light commercials and narrow enough for the smaller car, the CT177 is the ideal trailer for the motor trade or hire professional.

 

Its tilt bed action combined with pull out mini-skids allows for quick and efficient loading of vehicles either under their own power or using one of the winch options available.

The combination of optimum engineering design and high strength materials has produced a trailer with an excellent strength to weight ratio.

 

Wheel arch tops are only 10cm (4”) from the bed to give ample door clearance and feature high grip treads for safe entry and exit from the vehicle being carried. The optional heavy duty wheel straps feature a soft-link that will not damage expensive alloy wheels and can be stowed away in the built-in toolbox.

 

Mini-skids, to give improved ground clearance, can be quickly and easily slid into position. Fully retained at all times they cannot be lost or stolen and once the vehicle is loaded they simply slide back in place within the rear deck.

 

The removable winch arm is fully adjustable from side to side allowing alignment with off-centre
vehicle recovery eyes.

 

A range of winch options further enhance the trailer specification and the optional centre deck section fills three quarters of the centre deck area to provide a safe walk-on platform as an alternative to the open centre.

Standard features include:  
bullet 50mm ball coupling with lockable head bullet Fold-out rear lights
bullet Retained pull-out mini skids bullet Heavy duty jockey wheel
bullet Adjustable winch arm and mounting rail bullet Spare wheel recessed into trailer deck
bullet Hydraulic tilting system bullet Lockable toolbox
Optional features include:    
bullet Softlink adjustable wheel straps bullet Centre deck section fills
bullet Selection of winches    
CT177 with optional winch and adjustable wheel straps CT177 in tilt position with optional winch
CT177 with optional winch and adjustable wheel straps CT177 in tilt position with optional winch
CT177 with optional winch CT177 with optional winch
CT177 with optional winch CT177 with optional winch
Standard Dimensions
Standard Dimensions
Standard Features
Coupling Head Mini Skids Mini Skids Fitted Spare Wheel and Lockable Toolbox
Coupling Head
The lockable low-profile coupling
head ensures optimum clearance of 4x4 rear doors (also standard on CT136HD).
Mini Skids
Retained mini-skids for additional ground clearance, ideal for low clearance vehicles. Skids are kept in place by a steel peg located
underneath the rear light clusters.
Fitted Spare Wheel and Lockable Toolbox
Concealed neatly below the deck level, both are included as standard (optional GM5 winch shown).
Sliding Winch Bracket Sliding Winch Bracket Fold-out Adjustable Rear Light Clusters Fold-out Adjustable Rear Light Clusters
Sliding Winch Bracket
With the optional winch fitted on the bracket the whole assembly can move from side to side to allow for variation in vehicle towing eye
position. The winch bracket can be removed so valuable winch equipment can be locked away securely.
Fold-out Adjustable Rear Light Clusters
Rear light clusters fold out to allow wider vehicles access up ramps (lights should not be adjusted on public highways).
Perforated Platform Uncoupled Loading Galvanized Construction & Heavy Duty Wheel Arches
Perforated Platform
The whole of the trailer platform is perforated to provide both traction and
multiple lashing positions.
Uncoupled Loading
A special skid under the coupling allows the trailer to be loaded when uncoupled. This avoids overloading the towing vehicle towball when loading heavier
vehicles.
Galvanized Construction &
Hydraulic Tilt System

Galvanized steel deck and drawbar constructed from high tensile steel for maximum strength to weight ratio. Quick release fasteners and
hydraulic system combine to save
valuable time when loading.
Heavy Duty Wheel Arches
Steel wheel arches can be driven over by larger vehicles if necessary and provide a secure footstep.
C177 Options

The addition of selected accessories allows you to further enhance your transporter, and tailor it to suit your specific needs.

 

Heavy Duty Wheel Straps
Heavy duty wheel securing straps incorporating soft-link to avoid damage to alloy wheels.


GM5 Heavy Duty Strap Winch (mechanical) - see Sliding Winch option opposite
High quality all ball bearing winch with fast spool and rewind action and wide webbing strap.


3T Strap Winch (mechanical)
Standard 3 tonne rated mechanical winch fitted with webbing strap.


3T Cable Winch (mechanical)
Standard 3 tonne rated mechanical winch fitted with steel cable.


E40 Cable Winch (electric)
Electric winch supplied with hand held remote control and power leads, available in 12v and 24v versions. Also available with on board battery.


Centre Decking
Provides a safe walk on platform as an alternative to the open centre. Load rating of platform 300 Kg/m2. Covers 3/4 of trailer bed.

Heavy duty wheel straps
Centre decking
All winch options have an automatic brake, preventing the vehicle from rolling back if the winch handle is released whilst loading or unloading.
blank
Contact us on 01765 698948.
 
blank
blalnk image
blalnk image

Home | Contacts |

Ripon Trailer Centre © 2012. All rights reserved.

Part of the Ripon Farm Services Group

blank

Ripon Trailer Centre trading name of Ripon Farm Services Ltd,
Registered Office: Dallamires Lane, Ripon, North Yorkshire, HG4 1TT. Registered in England No. 1667383

blank