| Prop stands (Pair) |
 |
These help support and steady the
rear of the trailer when loading and
unloading (on DP Models, only
available as part of integrated skid
carrier). |
| Wind deflector |
 |
To improve the erodynamics of the trailer the lightweight GRP nose cone reduces drag and improves fuel
consumption especially on those long journeys. Available for 6’ and 7’
models only. |
| Cross divisions |
 |
| Both full size and half size (upper and lower) cross divisions are available. These can be carried on the front of the trailer (limitations apply when nose cone is fitted.) |
| Centre partition |
 |
Only available in the 7’ headroom
models, the centre partition kit
converts your livestock trailer to
having two side-by-side stalls. |
| Ramp Gate extensions |
 |
Available on all 6’ and 7’ models the
extension gates can be used to aid
loading/unloading. |
| DP Container demount |
 |
This kit enables you to remove the
DP container from the flatbed with
the use of a fork lift truck, enabling
your livestock trailer to be used as a
flatbed trailer. |
Dropside fitting, drop side
and loading skids |
 |
Available on DP models only, this
option allows the fitting of dropsides
and/or skids when the trailer is used as
a flatbed. This option must be
requested at the time of ordering. |
| Sump tank |
 |
| Two recessed drain points in the floor allow liquid waste to drain into the tank during transit. Drain covers are swung to one side to allow solid waste to be washed out through the tank while the ramp is closed. Screw off covers enable both sides of the tank to be opened for easy and thorough cleaning. |
| Mud Flaps |
 |
Ifor Williams Trailers branded mud
flaps. Can be fitted to DP models. |
